CTx – Custom Fabrication
Custom Made to clear your machine
We offer custom built CTx devices, at no additional cost, to make sure your machine gets the traction it needs. Below are some common areas that may require custom built CTx devices. If you’re not sure, give us a call or email us and we are happy to guide you to the correct device.
Front Idler Bracket
Some of the John Deere and JCB CTLs have a gusset and/or a bolt/nut that may create a clearance issue down at the front idler bracket.
Front Idler Gusset
Some of our customers have reversed this bolt/nut to the inside in order to allow for more clearance.
Rear drive sprocket shroud
Several CTL manufacturers cover the hydraulic lines with steel shrouds. Anything greater than an 1-inch will clear our universal device.
Many of the Kubota, Bobcat, JCB, and John Deere CTLs have tight tolerances around the final drive shroud. Anything less than 1-inch will require a custom inside hook device.
Fenders/brackets/shrouds
Some machines have fenders/shrouds that may require custom inside hooks. Our universal inside hook device will work with 1-inch or greater clearance.
We can still accommodate these low clearance areas.
How to Check for Device Clearance & Fit
